Voltage Drop Formula

On long wire runs, resistance causes the voltage to drop. This single-phase formula estimates the drop for a copper conductor.

VD = (2 × K × I × L) ÷ CM

What the terms mean

Symbol Meaning
VD Voltage drop, in volts
K Resistivity (about 12.9 for copper)
I Current, in amperes
L One-way length, in feet
CM Conductor area, in circular mils

Worked example

20 A over 100 ft of 12 AWG (6,530 CM) copper: (2 × 12.9 × 20 × 100) ÷ 6,530 = about 7.9 V, or 6.6% on 120 V.

Keep it under 3%. Branch circuits should hold voltage drop to about 3%. Past that, step up a wire gauge to lower resistance.

See the Power Formula and Voltage Drop Calculator.

A worked example

The formula for single phase voltage drop is two times the resistivity constant, the current, and the one way length, divided by the circular mils of the conductor. For copper, K is about 12.9. For a 15 amp load 100 feet away on 12 gauge wire, which is 6,530 circular mils, the drop is about 5.9 volts, which is about 4.9 percent of 120 volts.

Keeping the drop in range

A common guide is to keep the drop on a branch circuit to about three percent or less, so this example would call for a larger wire. Aluminum has a higher resistivity constant, about 21.2, so it needs a larger size for the same drop. Three phase circuits use a different multiplier. Check the applicable electrical code, and remember that warm conductors have higher resistance than cold ones.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.