Thread Weight Comparison Chart

Thread is measured in several systems. This chart compares the common weight (wt) numbers with the Tex system and typical uses.

Weight (wt) Tex (approx) Common use
12 wt 80 Heavy topstitching
30 wt 35 Bold embroidery
40 wt 25 Embroidery, quilting
50 wt 18 to 20 Piecing, general
60 wt 15 Fine applique
80 wt 10 Bobbin, lace
Two systems, opposite directions. In the wt system a higher number is finer; in the Tex system a higher number is heavier. Do not mix them up when matching thread.

See the Thread Weight Chart and the Seam Allowance Calculator.

How thread weights work

Thread is sold by weight numbers, and the systems can be confusing. In the weight system, a higher number means a finer thread, so 50 weight is finer than 30 weight. In the tex system, a higher number means a thicker thread. A 40 or 50 weight thread is the usual choice for general sewing and piecing quilts, and thicker threads are used for decorative stitching.

Matching thread and needle

Choose the thread to suit the fabric and the job, with fine thread for light fabrics and thick thread for heavy ones. A thicker thread needs a larger needle with a bigger eye, such as a topstitching needle, or it will fray and break. Use the same weight in the needle and the bobbin for the most even stitches, and buy good quality thread, since cheap thread leaves lint and breaks.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.