Delrin vs UHMW

Delrin and UHMW are both popular machinable plastics, but they behave very differently. Delrin is rigid and precise; UHMW is tough, slippery, and forgiving.

Property undefined undefined
Stiffness (modulus) High, 3.1 GPa Low, 0.7 GPa
Strength Higher Lower
Wear / abrasion Good Excellent
Impact resistance Good Excellent
Friction Low Very low
Dimensional stability Excellent Fair, can creep
Density 1.41 g/cc 0.93 g/cc
Typical use Precision gears, bushings Wear strips, liners, chutes

Which should you choose

Choose Delrin for rigid, dimensionally stable parts that need tight tolerances, such as gears, cams, and precision bushings.

Choose UHMW for abrasion and impact surfaces where toughness and a low-friction face matter more than stiffness, such as wear strips and chute liners.

Precision versus toughness. Delrin holds tight tolerances and stays rigid. UHMW shrugs off impact and abrasion but flexes and creeps, so it is not for precision parts.

FAQ

Which one machines more easily? Delrin (acetal) generally machines more cleanly to tighter tolerances, while UHMW is softer and gummier, making it better suited to wear strips and liners than precision machined parts.

Compare data sheets: Delrin (Acetal) and UHMW.

Where each one fits

Delrin, also called acetal, is stiff and dimensionally stable, which makes it a favorite for precision gears, bushings, and parts with close tolerances. UHMW is a much softer, slippery plastic with excellent abrasion and impact resistance, and it is used for wear strips, chute liners, and guides, where it handles rough use and sliding contact.

Machining differences

Delrin machines cleanly and holds tolerance. UHMW is gummy and tends to flex away from the tool, so use very sharp tools and light cuts, and allow for its larger thermal expansion. UHMW floats on water and has very low friction, but it is hard to glue. Both are available in grades suitable for food contact, so check the specification if that matters.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.