Foot Candle Calculator

PHOTOMETRY, BEAM, COLOR & UNITS

A foot-candle is one lumen falling on one square foot — the customary measure of illuminance in the US. Calculate it from total lumens and area, or from a point source using candela and distance in feet.

—
Foot-candles (fc)
—
Lux
Lumens method: fc = lumens divided by area in square feet. Point-source method: fc = candela divided by distance in feet squared.

Two ways to find foot-candles

For an area, divide the delivered lumens by the area in square feet. For a single fixture aimed at a point, the inverse-square law gives foot-candles as candela divided by the distance (in feet) squared.

Foot-candles to lux. Multiply foot-candles by 10.764 to get lux. So 35 fc is about 377 lux.

See the Foot Candle Formula and the Recommended Foot Candle Levels.

Foot candles and lux

A foot candle is one lumen falling on one square foot, and a lux is one lumen on one square meter. Because a square foot is smaller than a square meter, one foot candle equals about 10.76 lux, and you can convert between them by multiplying or dividing by that number. Light levels in the United States are often given in foot candles, and in most other places in lux.

Using the numbers

Light falls off with the square of the distance from a point source, so doubling the distance cuts the illuminance to a quarter. Light also drops with the cosine of the angle of incidence when it hits a surface at a slant. Recommended levels depend on the task, with office desks often in the range of 30 to 50 foot candles and warehouse aisles much lower. A light meter confirms the real level in the space.

Worked Example and Common Mistakes

Worked example: 3,000 lumens spread evenly over 100 square feet gives 3,000 ÷ 100 = 30 foot-candles. Since 1 foot-candle is about 10.76 lux, that is roughly 323 lux.

Common mistakes: The lumens reaching the surface are less than the lamp lumens because fixtures and room surfaces absorb some light, so real values are lower than the simple division. Recommended light levels depend on the task, and light is rarely perfectly even across a space.

Related: the Lumens to Watts Converter, the Kitchen Lighting Guide and the Garage Lighting Guide.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.