Deck Footing Chart

Footing size depends on how much deck area each post carries (its tributary area) and the soil. This chart gives typical footing diameters for average soil at common deck loads.

Footing diameter Supports up to
8 in about 20 sq ft of deck
10 in about 30 sq ft
12 in about 45 sq ft
16 in about 80 sq ft
Depth follows frost. Footings must extend below your local frost line so they do not heave. Weaker soil or larger tributary areas call for wider footings.

FAQ

Why does footing size depend on soil type, not just the load above it? Different soils bear weight differently — sandy or loose soil needs a larger footing to spread the same load over more area than dense clay or rock, which is why local code tables specify footing size based on both load and soil bearing capacity.

Size the concrete with the Concrete Footing Calculator and read Deck Footing Size Guide.

What sets the footing size

Each footing has to spread the load from its post over enough soil to avoid sinking. The load comes from the area of deck that post carries, plus the people, furniture, and snow on it, while the soil sets how much load each square foot of footing can bear. Weak or soft soil needs a larger footing than firm soil.

Depth and soil

Footings must reach below the local frost depth so they are not pushed up by freezing ground, and they should rest on firm, undisturbed soil. Attachment of the deck to the house is just as critical as the footings, with proper flashing and fasteners at the ledger. Check with the local building department, since many areas require permits and inspections for decks.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.