2×4 Actual Dimensions

A 2×4 does not actually measure 2 by 4 inches. A standard 2×4 is 1.5 inches by 3.5 inches. The “2×4” is the nominal (rough) size before the board is dried and planed smooth.

Nominal Actual size
2×4 1-1/2 x 3-1/2 in
2×6 1-1/2 x 5-1/2 in
2×8 1-1/2 x 7-1/4 in
2×10 1-1/2 x 9-1/4 in
2×12 1-1/2 x 11-1/4 in
Where the size goes. The board starts at the full nominal size when rough-sawn, then loses material when it is surfaced smooth and dried. Boards 8 in and wider lose 3/4 in instead of 1/2 in.

FAQ

Why is a 2×4 not actually 2 inches by 4 inches? The nominal size refers to the rough-cut dimension before the lumber is dried and planed smooth, a process that removes roughly 1/2 inch from each dimension, leaving the actual finished size at about 1.5 by 3.5 inches.

See the full Lumber Dimensions Chart and Plywood Sizes Chart.

Why the numbers differ

Lumber is cut to its nominal size while the wood is still green and rough, then dried and planed smooth, which removes about half an inch from each dimension. The name stays the same, but the board you carry home is smaller. Rough-sawn and some reclaimed lumber may come closer to the full nominal size, so measure before you build.

Using actual sizes in planning

Always plan with the actual dimensions. A wall framed with 2×4 studs is 3.5 inches deep, and adding two layers of half-inch drywall brings the finished wall to about 4.5 inches. A 2×6 stud wall is 5.5 inches deep. Lumber also shrinks and swells with moisture, so allow a little tolerance when a part must fit a tight opening.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.