Concrete Footing Calculator

CONCRETE & MASONRY

Size the concrete for your footings or piers. Choose the shape, enter the dimensions and how many you are pouring, and get the total volume plus the number of bags to buy.

—Volume
—Cubic yards
—80 lb bags
—60 lb bags

Bag yields: an 80 lb bag makes about 0.6 cu ft, a 60 lb bag about 0.45 cu ft. Add about 10% extra for spillage and over-dig.

See the Deck Footing Chart and How to Pour Concrete.

Calculating concrete for footings

Footing concrete is figured by volume, then converted to bags or yards. For each footing, compute the volume from its shape — a rectangular footing is length × width × depth; a round pier is π × radius² × depth — then multiply by the number of footings. Divide total cubic feet by 27 for cubic yards, or by the bag yield (about 0.6 cu ft for an 80-lb bag) for bag count, and add 5–10% for waste and over-dig.

For more than about a cubic yard total, ready-mix is usually cheaper and easier than mixing dozens of bags by hand. Footings must also extend below the local frost line and meet size requirements set by the load and soil — this calculator handles the volume, but always confirm footing dimensions and depth against local building code, since they’re structural.

How the volume is worked out

A round pier has a volume of pi times the radius squared times the depth, while a rectangular footing is its length times width times depth. The total for all the footings is then converted to cubic feet or cubic yards, and from there to a number of bags using the yield printed on the bag. A cubic yard is 27 cubic feet.

Ordering the right amount

Bag yields vary by brand and size, with an 80 pound bag typically giving about 0.6 cubic foot. Order a few percent more than the calculated volume to cover spillage and uneven holes. For larger pours, ready mix delivered by truck is often easier than mixing bags. Dig footings below the frost line and to firm soil, and follow the plans or local code for size.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.