Pegboard Layout Calculator

STORAGE & ORGANIZATION

Plan a pegboard for tool storage. Enter the wall space and hole spacing to get the pegboard size, hole count, and rough tool capacity.

pegboard
Approx Tool Capacity
— tools
Rough number of tools and hooks.

Usage Tip

Mount pegboard on furring strips or a frame so the hooks have clearance behind the board. Trace each tool so you can see at a glance what is out of place.

THE MATH
Pegboard area = width × height
Holes ≈ (width ÷ spacing) × (height ÷ spacing)
Tool capacity ≈ area ÷ about 36 sq in per tool
Standard pegboard has holes on 1-inch centers (light to medium hooks) or 2-inch centers for heavy-duty boards and larger pegs.
Tool capacity is a rough guide — big tools and bins take several holes, small hooks take one.
Pegboard must stand off the wall about 1/2 in (use furring strips or spacers) so hook ends can seat in the holes.
Standard 1/4-in pegboard suits most hand tools; use thicker tempered board or metal pegboard for heavy items.
Group tools by type and trace their outlines so everything has a home and you can see what is missing.
Practical Notes

Standard pegboard has holes about a quarter inch across spaced on one inch centers, and it needs a gap behind it so that the hooks can go in. Mount it on furring strips or spacers that leave at least a quarter inch of clearance, and screw it into the studs so it can carry the weight of the tools.

Group tools by how often you use them and put the ones you reach for most at eye level. Drawing an outline of each tool makes it clear where it belongs, and locking hooks keep them from lifting off when a tool is pulled away. Heavy tools hang better on lower sections with extra support, and the tool capacity shown is only a rough guide.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.