Setup & Workholding Calculators

Setup & Workholding

Setup & Workholding Calculators

Vise jaws, work offsets, tool length offsets, clamping forces, and setup documentation.

Vise Jaw Width
Width = Part + 2 × Clearance
Result
—
in
Soft Jaw Bore
Bore = Part Dia − Allowance
Result
—
in
Tool Length Offset
TLO = Gauge Length − Reference
Result
—
in
T-Slot Nut Width
Nut = Slot − Clearance
Result
—
in
Clamping Force
F = Torque / (K × Bolt Dia)
Result
—
lbf
Parallels Height
H = Z Stick-up − Jaw Height
Result
—
in
Raw Stock Length
Raw = Part + Allowance + Grip
Result
—
in
Work Offset
G54 = Machine Zero − Part Zero
Result
—
in
Fixture Plate Thickness
T = Load / (Strength × Area)
Result
—
in min
How to Use These Calculators

Workholding math only protects a part if the numbers feed into a decision you actually make at the machine — clamping force is only useful compared against the cutting forces the job will generate, and a vise jaw width calculation only matters if you check it before, not after, you’ve already cut custom soft jaws.

Work offsets and tool length offsets should be verified with a test move at a safe height before the first real cut on a new setup, especially after swapping fixtures or vises — a wrong offset is one of the few setup mistakes that can crash a spindle into a part or fixture within seconds.

For repeat jobs, write down the specific offsets, jaw settings, and fixture orientation once they’re proven, rather than recalculating from scratch each time — setup documentation is what turns a one-off calculation into a repeatable process the next operator can follow.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.