Chamfer Calculator

GEOMETRY & SHOP MATH

Chamfer calculator converts a target chamfer angle and one known leg (depth or width) into the other leg, for programming an edge break or bevel.

Width (Face Leg)—
Chamfer Length (Hypotenuse)—
Included Angle (Both Sides)—
Angle is measured from the flat face to the chamfer cut. A 45° angle gives equal legs (depth = width).

How it works

A chamfer cut forms a right triangle where the two legs are the axial depth and radial width of the cut, connected by the chamfer angle measured from the flat face. At exactly 45°, depth and width are equal; any other angle makes the triangle uneven, so knowing the angle and one leg is enough to solve for the other.

FAQ

What’s a typical chamfer angle and size? 45° by 0.010 to 0.030 in is a very common general-purpose edge break; sharper functional chamfers, like lead-ins for threads or press fits, often use 30° or 60° depending on the mating part’s requirements.

Related Guides

CNC Calculators · Thread Turning Calculator · Right Triangle Calculator

Where chamfers come from

A chamfer is a small angled cut at an edge that removes sharp corners, helps parts assemble, and breaks the burr left by machining. Drawings give it as an angle and one leg, such as a depth along the axis, while the program may need the other leg. This calculator turns one leg and the angle into the other.

How the legs relate

The two legs form a right triangle with the chamfer face as the long side. At 45 degrees the legs are equal, and as the angle moves away from 45 one leg grows while the other shrinks. The width equals the depth multiplied by the tangent of the angle from the face, so a shallow angle gives a wide, shallow bevel.

Practical tips

Check which direction the angle is measured from before entering it, since a drawing may measure from the face or from the axis and the two give very different legs. If you cut the chamfer with a chamfer mill or a countersink, remember that the tool tip diameter and the programmed depth together set the final size.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.