Sports Lighting Guide

Sports lighting must deliver high, uniform horizontal and vertical illuminance with controlled glare, scaled to the level of play and any broadcast requirements.

Level of play Horizontal target
Recreational 200 to 300 lux
Club / amateur 300 to 500 lux
Competition 500 to 750 lux
Professional / broadcast 1,000 to 2,000 lux+

Uniformity, glare, and broadcast

Vertical illuminance matters as much as horizontal for players and cameras. Tight uniformity ratios and careful aiming with visors cut glare and spill light beyond the field.

Broadcast raises the bar: high-speed cameras need flicker-free drivers and strong vertical light, and the governing body for each sport sets the exact class.

Broadcast needs vertical lux. For televised events, design to vertical illuminance and flicker-free output for slow-motion replay, not just the floor (horizontal) level.

See the Sports Lighting Calculator and the Recommended Lux Levels.

Uniformity and glare

Sports lighting has to do more than make a field bright. The light must be even across the playing area so the ball does not seem to change brightness, and it must control glare for players, spectators, and neighbors. Vertical illuminance matters too, since cameras and players looking across the field need light on faces and bodies and not only on the ground.

Planning a system

The level needed rises with the level of play, from recreational through club to competition, and broadcast events need more again. Pole height, spacing, and aiming angles decide how evenly the light spreads, and good aiming reduces light spilling onto nearby properties. Use photometric calculations and the standards set out by lighting societies for the sport, and consider LED floodlights for instant on, controllability, and long life.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.