304 vs 316 Stainless Steel

304 and 316 are the two most widely used stainless steels. They look identical, but 316 adds molybdenum for far better corrosion resistance in harsh environments.

Property undefined undefined
Composition 18% Cr, 8% Ni 16% Cr, 10% Ni, 2 to 3% Mo
Corrosion resistance Good Excellent, resists chlorides
Yield strength About 215 MPa About 205 MPa
Cost Lower Higher, 20 to 30% more
Magnetic No (austenitic) No (austenitic)
Typical use Kitchen, architectural, general Marine, chemical, medical

Which should you choose

Choose 304 for everyday use such as food equipment, fasteners, and architectural trim, where it offers great corrosion resistance at a lower price.

Choose 316 when chlorides are present, as in saltwater, pools, or chemical processing. The added molybdenum resists the pitting that would attack 304.

Molybdenum makes the difference. The 2 to 3 percent molybdenum in 316 is what defeats chloride pitting. For marine and chemical use, pay for 316; otherwise 304 is plenty.

Compare data sheets: 304 Stainless Steel and 316 Stainless Steel.

What molybdenum does

The main difference is that 316 contains molybdenum, which greatly improves resistance to chlorides, such as salt water, de icing salts, and many chemicals. That is why 316 is used for marine hardware, chemical processing, and medical and food equipment where corrosion matters, while 304 is the general purpose choice for kitchens and indoor use.

Cost and fabrication

316 costs noticeably more than 304, so use it where it is needed. Both work harden when machined, so use sharp tools and a steady feed. For welded parts, the low carbon L grades, 304L and 316L, help avoid corrosion at the welds. Both are non magnetic when annealed, though cold working can make them slightly magnetic.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.