GD&T (Geometric Dimensioning and Tolerancing) is a symbolic language on drawings that controls a feature’s geometry — not just its size, but its form, orientation, and position — so parts fit and function as intended. It communicates design intent far more precisely than plus/minus dimensions alone.
The main categories of control
| Category | Controls | Example symbols |
|---|---|---|
| Form | Shape of a single feature | Flatness, straightness, circularity |
| Orientation | Angle to a datum | Perpendicularity, parallelism |
| Location | Position relative to datums | Position, concentricity |
| Runout | Variation as a part rotates | Circular & total runout |
| Profile | Overall surface shape | Profile of a line/surface |
GD&T relies on datums — reference surfaces that establish a coordinate system — and feature control frames, the boxed callouts pairing a symbol, a tolerance, and the datums it references. For controlled drawings, follow the governing standard (such as ASME Y14.5).
Frequently asked questions
What does GD&T do that dimensions don’t? It controls geometry — form, orientation, and position — not just size.
What is a datum? A reference surface that defines the coordinate system for measurements.
Is GD&T standardized? Yes — commonly to ASME Y14.5 (or ISO GPS).
Reading a feature control frame
Geometric tolerances are shown in a box called a feature control frame, read from left to right. The first cell holds the symbol for the type of control, the next holds the size of the tolerance zone, and the cells after it name the datums the feature is measured from, in order of importance. The datums are the reference surfaces that define how the part is located and measured.
Families of symbols
The symbols fall into groups: form controls such as flatness and circularity, orientation controls such as perpendicularity and parallelism, location controls such as position, profile controls for surfaces, and runout controls for rotating parts. Modifiers such as maximum material condition can give extra tolerance as features depart from their limits. The standard most drawings follow is ASME Y14.5, which should be noted on the drawing.
