6061 and 7075 are the two most common aluminum alloys, but they serve very different roles. 6061 is the versatile workhorse; 7075 is the high-strength aerospace alloy.
| Property | undefined | undefined |
|---|---|---|
| Yield strength | 276 MPa (40 ksi) | 503 MPa (73 ksi) |
| Tensile strength | 310 MPa (45 ksi) | 572 MPa (83 ksi) |
| Density | 2.70 g/cc | 2.81 g/cc |
| Weldability | Excellent | Poor |
| Corrosion resistance | Good | Fair |
| Machinability | Good | Good |
| Cost | Lower | Higher |
| Typical use | General structural, frames | Aerospace, high-stress parts |
Which should you choose
Choose 6061 for general fabrication where you need to weld, bend, or resist corrosion at a reasonable cost. Choose 7075 when strength-to-weight is critical and the part can be machined rather than welded.
7075 is roughly 80 percent stronger but gives up weldability and some corrosion resistance, and it costs more.
Compare data sheets: 6061-T6 Aluminum and 7075-T6 Aluminum.
Strength versus workability
7075 is one of the strongest aluminum alloys, with roughly twice the yield strength of 6061 in the T6 temper, which is why it is used in aircraft structures and high stress parts. 6061 is cheaper, easier to weld, and more corrosion resistant, so it is the standard choice for general purpose parts, frames, and fixtures.
Cautions
7075 is not normally welded, since the weld can crack and lose strength, and it is less resistant to corrosion, which is why it is often anodized or coated. Both alloys machine well and anodize well, though 7075 usually takes a finer finish. Use 6061 unless the part truly needs the extra strength of 7075, since it costs more.
