A bearing supports a rotating shaft while minimizing friction. Selecting one starts with the direction of load it must carry.
| Bearing type | Best for |
|---|---|
| Ball bearing | Moderate radial + some axial load, high speed |
| Cylindrical roller | Heavy radial loads |
| Tapered roller | Combined radial + axial (e.g., wheel hubs) |
| Thrust bearing | Axial (push-along-shaft) loads |
Key selection factors
Beyond load direction, match the magnitude of the load (its dynamic and static load ratings must exceed your loads with margin), the speed (every bearing has a limiting speed), and the life required. Bearing life is usually given as L10 — the number of revolutions (or hours) that 90% of bearings will reach before fatigue. Also consider lubrication, sealing against contamination, and operating temperature.
Frequently asked questions
What bearing for axial loads? A thrust bearing (or tapered roller for combined loads).
What is L10 life? The life 90% of bearings will reach before fatigue failure.
What matters most in selection? Load direction first, then magnitude, speed, and required life.
Load direction and bearing choice
Radial loads act across the shaft and axial or thrust loads act along it, and many bearings are designed for one or the other. Ball bearings handle moderate radial loads at high speeds with low friction, roller bearings carry heavier loads, angular contact bearings carry combined radial and thrust loads, and thrust bearings are made for loads along the axis.
Other considerations
Check the speed rating, the temperature, and the expected life, which is often given as the L10 life, the number of revolutions that 90 percent of a group of identical bearings should reach. Lubrication and sealing affect life greatly, and the fit of the bearing on the shaft and in the housing must follow the maker’s recommendations. Where shafts may be misaligned, a self aligning type tolerates it. Use the manufacturer’s catalog for final sizing.
