Plywood Sizes Chart

Like dimensional lumber, plywood runs slightly under its nominal thickness — about 1/32 inch thinner. Sheets come in a standard 4 by 8 foot size.

Nominal thickness Actual thickness
1/4 in 7/32 in (0.219)
3/8 in 11/32 in (0.344)
1/2 in 15/32 in (0.469)
5/8 in 19/32 in (0.594)
3/4 in 23/32 in (0.719)
1-1/8 in 1-1/8 in (subfloor)
Standard sheet: 4 ft x 8 ft (48 x 96 in). Sanded and hardwood plywood run a touch thinner than the sheathing grades shown here.

FAQ

Are all plywood sheets exactly 4×8 feet? The standard sheet is 4×8 feet, but plywood is also sold in other sizes like 4×4 or 2×8 for smaller jobs, and actual sheet dimensions can run slightly under nominal size, so measure before assuming a perfect fit on a tight layout. Thickness options like 1/2 or 3/4 inch also affect span capability between supports, so check both sheet size and thickness for the application.

See the Lumber Dimensions Chart and the Drywall Sizes Chart.

Why the thickness differs

Plywood is sold by nominal thickness but is made slightly thinner, about one thirty-second of an inch under, so a three quarter inch sheet is a little less. Mixing sheets of different actual thickness can leave a visible step, so buy enough of one kind for a job such as a floor.

Choosing and using plywood

Grades describe the quality of the face veneers, and the glue is either interior or exterior type depending on the moisture it will see. For subfloors and roof sheathing the face grain should run across the supports, since that is the stronger direction of the sheet. Leave a small gap between sheets for expansion, and keep the edges sealed outdoors.

Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.