Cylindrical Wrap Length Calculator

4TH & 5TH AXIS

Find the flat-pattern length of a feature wrapped around a cylindrical part on a 4th axis, such as engraved text, a label area, or a helical groove span.

–
Wrap Length (in)

Wrap length = pi x diameter x (wrap angle / 360). At 360 degrees this is just the full circumference, smaller angles give the arc length for a partial wrap.

How it works

Anything designed flat, like a line of engraved text or a label graphic, needs to fit within the available arc length on the actual cylinder before it gets wrapped onto the part by the rotary axis. Converting diameter and wrap angle into a flat length lets you lay it out correctly before cutting.

FAQ

Does this account for the part tapering? No, this assumes a constant diameter across the wrapped feature. For a tapered part, use the diameter at the section you care about most.

Related Guides

CNC Calculators · Rotary Indexing Calculator · Rotary 4th-Axis Feed Rate Calculator

Why wrapped features need a flat length

On a 4th axis, a feature such as engraved text, a label area, or a helical groove is laid out as if the surface were unrolled flat. To fit that artwork around the part, you need to know how much flat length the wrap angle covers at the part diameter. This calculator gives that length from the diameter and the angle.

How it is calculated

Wrap length equals pi times the part diameter times the wrap angle divided by 360. A full 360 degree wrap equals the circumference, and half the angle gives half the length. A larger diameter covers more flat length for the same angle, so the same artwork needs a different wrap on a different size part.

Practical tips

Use the diameter at the surface being cut, not the stock diameter of the bar, if the feature sits on a step. Leave a small gap so the start and end of wrapped text do not collide, and remember that engraving depth does not change the layout but changes how well the tool follows the curve on small diameters.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.