Pipe “schedule” is the wall thickness for a given nominal size — a higher schedule means thicker walls and a higher pressure rating. Note the nominal size is not the actual outside diameter.
| Nominal | OD (in) | Sch 40 wall | Sch 80 wall |
|---|---|---|---|
| 1/2 in | 0.840 | 0.109 | 0.147 |
| 3/4 in | 1.050 | 0.113 | 0.154 |
| 1 in | 1.315 | 0.133 | 0.179 |
| 1-1/4 in | 1.660 | 0.140 | 0.191 |
| 1-1/2 in | 1.900 | 0.145 | 0.200 |
| 2 in | 2.375 | 0.154 | 0.218 |
| 3 in | 3.500 | 0.216 | 0.300 |
| 4 in | 4.500 | 0.237 | 0.337 |
FAQ
What does pipe schedule (like Schedule 40 vs Schedule 80) actually indicate? Schedule number indicates wall thickness for a given nominal pipe size, not the outside diameter, which stays the same across schedules. A higher schedule number means a thicker wall and smaller inside diameter, used for higher pressure or more demanding applications.
See the Copper Pipe Dimensions and PVC Pipe Dimensions.
Where the Numbers Come From
Schedule numbers trace back to the ANSI/ASME B36.10 and B36.19 standards, which standardized pipe wall thicknesses so fittings, threads, and flanges from different manufacturers would fit together. The schedule number itself is roughly tied to a pressure-and-stress calculation, though the actual wall thickness for each nominal size is tabulated rather than computed fresh for every pipe.
Stainless pipe commonly uses a parallel “S” series — 5S, 10S, 40S, and 80S — which generally run thinner than their carbon-steel counterparts of the same number, since stainless pipe is often sized by inside diameter and flow capacity rather than by the same pressure margins carbon steel needs.
Because nominal size and actual outside diameter diverge (a “1-inch pipe” is 1.315 in OD), always pull the OD from a chart rather than assuming it when turning a fitting, cutting threads, or checking clearance through a bulkhead.
