Like dimensional lumber, plywood runs slightly under its nominal thickness — about 1/32 inch thinner. Sheets come in a standard 4 by 8 foot size.
| Nominal thickness | Actual thickness |
|---|---|
| 1/4 in | 7/32 in (0.219) |
| 3/8 in | 11/32 in (0.344) |
| 1/2 in | 15/32 in (0.469) |
| 5/8 in | 19/32 in (0.594) |
| 3/4 in | 23/32 in (0.719) |
| 1-1/8 in | 1-1/8 in (subfloor) |
FAQ
Are all plywood sheets exactly 4×8 feet? The standard sheet is 4×8 feet, but plywood is also sold in other sizes like 4×4 or 2×8 for smaller jobs, and actual sheet dimensions can run slightly under nominal size, so measure before assuming a perfect fit on a tight layout. Thickness options like 1/2 or 3/4 inch also affect span capability between supports, so check both sheet size and thickness for the application.
See the Lumber Dimensions Chart and the Drywall Sizes Chart.
Why the thickness differs
Plywood is sold by nominal thickness but is made slightly thinner, about one thirty-second of an inch under, so a three quarter inch sheet is a little less. Mixing sheets of different actual thickness can leave a visible step, so buy enough of one kind for a job such as a floor.
Choosing and using plywood
Grades describe the quality of the face veneers, and the glue is either interior or exterior type depending on the moisture it will see. For subfloors and roof sheathing the face grain should run across the supports, since that is the stronger direction of the sheet. Leave a small gap between sheets for expansion, and keep the edges sealed outdoors.
