Lumber is sold by its nominal size, but the actual milled dimensions are smaller. A “2×4” is really 1.5 by 3.5 inches. Here is the full nominal-to-actual chart.
| Nominal | Actual (in) |
|---|---|
| 1×2 | 3/4 x 1-1/2 |
| 1×4 | 3/4 x 3-1/2 |
| 1×6 | 3/4 x 5-1/2 |
| 1×8 | 3/4 x 7-1/4 |
| 1×10 | 3/4 x 9-1/4 |
| 1×12 | 3/4 x 11-1/4 |
| 2×2 | 1-1/2 x 1-1/2 |
| 2×4 | 1-1/2 x 3-1/2 |
| 2×6 | 1-1/2 x 5-1/2 |
| 2×8 | 1-1/2 x 7-1/4 |
| 2×10 | 1-1/2 x 9-1/4 |
| 2×12 | 1-1/2 x 11-1/4 |
| 4×4 | 3-1/2 x 3-1/2 |
| 6×6 | 5-1/2 x 5-1/2 |
FAQ
Why do lumber dimensions differ between nominal and actual size? Like a 2×4, most dimensional lumber is surfaced (planed smooth) after rough cutting, which removes material from the nominal size, so a piece of lumber’s actual finished dimensions are consistently smaller than its nominal name suggests.
See the 2×4 actual dimensions and the Plywood Sizes Chart.
Nominal and actual
Nominal sizes are the names used for lumber, and actual sizes are what the board measures after drying and planing. For most dimensional lumber, boards about 2 inches thick measure 1.5 inches, and widths of 4, 6, 8, 10, and 12 inches measure 3.5, 5.5, 7.25, 9.25, and 11.25 inches. Boards that are one inch thick measure 0.75.
Buying and planning
Always design with the actual dimensions, and measure a sample, since boards can vary a little and move with moisture. Lengths are typically sold in two foot steps. Hardwood is often sold by the board foot, which is thickness in inches times width in inches times length in feet, divided by 12, rather than by these standard sizes.
