BCI group size describes a car battery physical dimensions and terminal layout — not its power. A replacement must match the group size to fit the tray and reach the cables. This chart maps common groups to typical vehicles.
| Group | Dimensions (L x W x H) | Common vehicles |
|---|---|---|
| 24 / 24F | 10.3 x 6.8 x 8.9 in | Toyota, Honda, Nissan, Acura, Lexus |
| 34 | 10.3 x 6.8 x 7.9 in | Chrysler, Dodge, some GM |
| 35 | 9.1 x 6.9 x 8.9 in | Toyota, Honda, Nissan, Subaru |
| 47 (H5) | 9.5 x 6.9 x 7.5 in | Chevy Cruze, Buick, VW, Volvo |
| 48 (H6) | 12.1 x 6.9 x 7.5 in | GM, Ford, Audi, BMW, VW |
| 49 (H8) | 13.9 x 6.9 x 7.5 in | BMW, Mercedes, large European |
| 51R | 9.4 x 5.1 x 8.9 in | Honda, Nissan, Mazda |
| 65 | 12.1 x 7.5 x 7.6 in | Ford trucks and large cars |
| 75 | 9.1 x 7.1 x 7.5 in | GM (side terminal) |
| 78 | 10.2 x 7.1 x 7.7 in | GM trucks (side terminal) |
Match the group size and terminal position (top vs side, and which side is positive). Within a group, higher CCA and reserve capacity give more starting power.
Check charge state with the Battery Voltage Chart.
CCA vs. Reserve Capacity
Cold cranking amps (CCA) measures how much current the battery can deliver for 30 seconds at 0°F, which is what actually starts a cold engine — it is the number most buyers focus on. Reserve capacity, how many minutes the battery can supply a steady 25 amps before dropping below a usable voltage, matters more for how long accessories keep running if the alternator fails. Two batteries with the same group size and similar CCA can still have meaningfully different reserve capacity.
Upgrading within a group is usually safe. Choosing a battery with higher CCA or reserve capacity than the original, as long as it is still the correct group size and terminal layout, generally will not harm the vehicle — the alternator and charging system are designed to handle a range of battery capacities. Changing to a different group size to chase more capacity is the real risk, since it may not fit the tray or reach the cables.
