Backsplash Tile Calculator

KITCHEN & BATH

Estimate tile for a kitchen or bath backsplash. Enter the wall size and tile size to get the square footage and tile count to buy, with a waste allowance.

backsplash field (with outlet)
Backsplash to Buy
— sq ft
Field area plus waste allowance.

Usage Tip

Order a little extra from the same lot and keep it for future repairs — matching tile later is hard. Mosaic sheets cover faster than individual small tiles.

THE MATH
Area = Length (ft) × Height (ft)
Tiles = Area × 144 ÷ (Tile W × Tile H)
Buy = round up of Area and Tiles × (1 + waste%)
A standard backsplash field is about 18″ tall, from the countertop to the upper cabinets. Tile is sold by the square foot or by the piece — this gives both.
Cuts around outlets, windows, and the range come out of the tile you buy, so they do not reduce the quantity; the waste allowance covers breakage and cuts.
Use about 10% waste for a straight grid and closer to 15% for diagonal, herringbone, or mosaic-sheet layouts.
Buy all tile from the same lot so color and size match across the wall.
Practical Notes

The area of a backsplash is its length times its height, minus any windows or large openings. Include a waste allowance when ordering, usually about ten to fifteen percent, and more for diagonal layouts, small mosaic tiles, or patterns that need a lot of cutting. It is much easier to order enough than to try to match a tile later.

Tiles from different production lots can vary slightly in color, so buy everything for the job from the same lot and check the box numbers. Plan the layout so that cut tiles at the ends are not too narrow, and plan around outlets and switches. Remember to allow for grout lines, and check the coverage of the adhesive and grout you plan to use.

Spotted an error or have a suggestion for this calculator? Let us know →
Scroll to Top

The calculators and tools on Formula Factory are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. Formula Factory makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.